The shock absorber of a motorcycle is too soft or too hard, and it is not very good. There are many disadvantages, so you must learn to adjust the shock absorber of the motorcycle by yourself. Then how to adjust the shock absorber of the motorcycle?

motorcycle shock absorber adjustment method:

1. First, find the specific position of the shock absorber, which is at the front wheel of the motorcycle, usually at the connection between the frame and the front wheel.

2. After you find it, you need to disassemble the shock absorber. Before disassembling, you can spray a little water on the shock absorber and clean it properly. This will be more beneficial to the subsequent adjustments.

3. Then find a hexagonal nut and insert it directly into the adjusting hole of the shock absorber. Turn the shock absorber counterclockwise. If you hear a click, it means you have adjusted it once.

4. Generally, counterclockwise adjustment can make the shock absorber softer and softer. If the shock absorber is turned clockwise, the shock absorber can be adjusted harder and harder. Most motorcycles are soft when they leave the factory.

If the shock absorber of a motorcycle is too soft, there will be a slight pothole on the road during driving on the road, and the parts of the whole vehicle will easily collide with the frame, which will damage the parts of the car. On the contrary, if the shock absorber of the motorcycle is too hard, there is also a problem. In the process of riding, the arm vibration will be more serious, and the handling of the car will be relatively poor. In serious cases, some traffic accidents may occur.

In fact, the working principle of the shock absorber of a motorcycle is relatively simple and very easy to understand, that is, compression and rebound, so that the shock absorption effect can be achieved, and the shock absorption effect of different softness and hardness will be different., So you need to adjust the appropriate hardness according to your riding situation.